Solutions
Lab Capabilities

SCCPL undertakes all types of mechanical instruments and electronic sensors within the parameters of Force, Pressure, Torque and Displacement.

Here's a list of equipments we undertake for calibration :
In -House Calibration Facility(with NABL Accredited Scope)
Sl. No. Parameter  What We Calibrate Range Measurement Capability(CMC).
1 Pressure Digital I Analogue Pressure Indicating devices 0.1 MPa to 35 MPa ±0.10% of rdg.
35MPa to 70 MPa ±0.16% of rdg.
2 Differential Sensor Used in Air Leak Tester ± 2000Pa ±4.67 Pa
3 Gauge Sensor used in Air leak Tester. 0 to 1000 kPa ±0.85 kPa
4 Differential pressure I Vacuum Sensor ± 10 kPa ±0.02 kPa
5 Dimension Dial gauges_ (L.C. 1O μm or more only) up to 10mm ±6.7 μm
6 Feeler Gauges up to 1 mm ±2.2 μm
7 AirFlow Air Flow Measuring Devices 1 to 10 ml/min ± 1.43% of rdg
8 2 to 100 l/min ± 1.00% of rdg
9 20 to 1000 ml/min ± 1.20% of rdg
10 0.2 to 10 l/min ± 1.00% of rdg
11 20 to 200 l/min ±1.31% of rdg
12 5 to 50 l/min ± 1.00% of rdg
On - Site  Calibration Facility(with NABL Accredited Scope)
13 Pressure Analog / Digital Pressure gauges, Manometers/Bourdon & other conventional Gauges 0 to 2 bar ±0.13% of rdg
2 to 20 bar ±0.25% of rdg
14 2 to 40 bar ±0.30% of rdg
15 20 to 200 bar ±0.32% of rdg
25 to 600 bar
16 Differential Sensor Used in Air Leak Tester ± 2000Pa ±4.53 Pa
17 Gauge Sensor used in Air leak Tester. 0 to 1000 kPa ±0.70 kPa
18 Differential Sensor Used in Air Leak Tester ± 2000Pa ±1.80 Pa
19 Gauge Sensor used in Air leak Tester. 0 to 1000 kPa ±0.7 kPa
20 Differential Sensor Used in Air Leak Tester ± 2000Pa ±1.90 Pa
21 Gauge Sensor used in Air leak Tester. 0 to 1000 kPa ±0.80 kPa
22 Differential Sensor Used in Air Leak Tester ± 2000Pa ±5.0 Po
23 Gauge Sensor used in Air leak Tester. 0 to 1000 kPa ±0.80 kPa
24 Vacuum Digital I Anolog Pressure gauges / Manometers/Bourdon & other conventional Gauges 60 to 630 mm of Hg ±0.16% of rdg
25 30 to 630mm of Hg ±0.80 mmHg
26 Force Force measuring system of UTM Compression 2 kN to 400 kN ±0.60% of rdg
In - House  Calibration Facility(without NABL Accredited Scope)
Sl. No. Parameter  What We Calibrate Range
1. Force  Load Cells, Force proving Instruments,Push-pull Gauges 0.049N to 0.975N 0 to 1000 N
2. Pressure  Differential Sensor Used in Air Leak Tester 0 to 2000Pa
3.    Gauge Sensor used in Air leak Tester. 0 to 10 bar
4. Torque  Electronic Torque Sensor 0 to 3000 kg-m
5. 978.8Nm to 4890 Nm-->0 to 3000 kg-m
6. Mass  Top Loading Balance 3 to 30 kg
7. Platform Scale 20 to 200 kg
8. Vibration  Vibration Sensor Up to 2 g
On - Site  Calibration Facility(without NABL Accredited Scope)
9. Force  Load Cells 0 to 100T
10. Dimension  Electronic Sensor. 0 to 50 mm
11. Dial gauges. 0 to 10 mm
12. Displacement Sensor (LVDT). 0 to 100 mm
13. Mass  Top Loading Balance. 3 to 30 kg
14. Air Flow  Air Flow Measuring Devices up 10 ml/min
15. up to 100 ml/min
16. up to 1000 ml/min
17. up to 10 L/min
18. up to 200 L/min
   
  Click here to see our NABL ACCREDITATED SCOPE